Installing and configuring the Zowe cross memory server (ZWESISTC)
Installing and configuring the Zowe cross memory server (ZWESISTC)
The Zowe cross memory server provides privileged cross-memory services to the Zowe Desktop and runs as an APF-authorized program. The same cross memory server can be used by multiple Zowe desktops. If you wish to start Zowe without the desktop (for example bring up just the API Mediation Layer), you do not need to install and configure a cross memory server and can skip this step. The cross memory server is needed to be able to log on to the Zowe desktop and operate its apps such as the File Editor.
To install and configure the cross memory server, you must define APF-authorized load libraries, program properties table (PPT) entries, and a parmlib. This requires familiarity with z/OS.
- PDS sample library and PDSE load library
- Load module
- PARMLIB
- PROCLIB
- SAF configuration
- Summary of cross memory server installation
- Starting and stopping the cross memory server on z/OS
- Zowe auxiliary service
#
PDS sample library and PDSE load libraryThe cross memory server runtime artifacts, the JCL for the started tasks, the parmlib, and members containing sample configuration commands are found in the SZWESAMP
PDS sample library.
The load modules for the cross memory server and an auxiliary server it uses are found in the SZWEAUTH
PDSE.
The location of SZWESAMP
and SZWEAUTH
for a convenience build depends on the value of the zowe-install.sh -h
argument. For more information, see Install Zowe z/OS convenience build.
For an SMP/E installation, SZWESAMP
and SZWEAUTH
are the SMP/E target libraries whose location depends on the value of the #thlq
placeholder in the sample member AZWE001.F1(ZWE3ALOC)
.
The cross memory server is a long running server process that, by default, runs under the started task name ZWESISTC
with the user ID ZWESIUSR
and group of ZWEADMIN
.
The ZWESISTC
started task serves the Zowe desktop that is running under the ZWESVSTC
started task, and provides it with secure services that require elevated privileges, such as supervisor state, system key, or APF-authorization.
The user ID ZWESIUSR
that is assigned to the cross memory server started tasks must have a valid OMVS segment and read access to the load library SZWEAUTH
and PARMLIB data sets. The cross memory server loads some functions to LPA for its PC-cp services.
To install the cross memory server, enable the PROCLIB, PARMLIB, and load module. This topic describes the steps to do this manually.
If you want to install and configure the cross memory server by using scripts, see Scripted installation and configuration of Zowe z/OS components.
#
Load moduleThe cross memory server load module ZWESIS00
is installed by Zowe into a PDSE SZWEAUTH
. For the cross memory server to be started, the load module needs to be APF-authorized and the program needs to run in key(4) as non-swappable.
#
APF authorizeAPF authorize the PDSE SZWESAUTH
. This allows the SMP/E APPLY and RESTORE jobs used for applying maintenance to be operating on the runtime PDSE itself when PTF maintenance is applied.
Do not add the SZWEAUTH
data set to the system LNKLIST or LPALST concatenations.
To check whether a load library is APF-authorized, you can issue the following command:
D PROG,APF,DSNAME=hlq.SZWEAUTH
where the value of DSNAME is the name of the SZWEAUTH
data set as created during Zowe installation that contains the ZWESIS01
load module.
Issue one of the following operator commands to dynamically add the load library to the APF list (until next IPL), where the value of DSNAME is the name of the SZWEAUTH
data set, as created during Zowe installation.
If the load library is not SMS-managed, issue the following operator command, where
volser
is the name of the volume that holds the data set:SETPROG APF,ADD,DSNAME=hlq.SZWEAUTH,VOLUME=volser
If the load library is SMS-managed, issue the following operator command:
SETPROG APF,ADD,DSNAME=hlq.SZWEAUTH,SMS
Add one of the following lines to your active PROGxx
PARMLIB member, for example SYS1.PARMLIB(PROG00)
, to ensure that the APF authorization is added automatically after next IPL. The value of DSNAME
is the name of the SZWEAUTH
data set, as created during Zowe installation:
- If the load library is not SMS-managed, add the following line, where
volser
is the name of the volume that holds the data set:APF ADD DSNAME=hlq.SZWEAUTH VOLUME=volser
- If the load library is SMS-managed, add the following line:
APF ADD DSNAME=hlq.SZWEAUTH SMS
The PDS member SZWESAMP(ZWESIMPRG)
contains the SETPROG statement and PROGxx update for reference.
#
Key 4 non-swappableThe cross memory server load module ZWESIS01
must run in key 4 and be non-swappable. For the server to start in this environment, add the following PPT entries for the server and address spaces to the SCHEDxx member of the system PARMLIB.
PPT PGMNAME(ZWESIS01) KEY(4) NOSWAP
The PDS member SZWESAMP(ZWESISCH)
contains the PPT lines for reference.
Then, issue the following command to make the SCHEDxx changes effective:
/SET SCH=xx
#
PARMLIBThe ZWESISTC
started task must find a valid ZWESIPxx
PARMLIB member in order to be launched successfully. The SZWESAMP
PDS created at installation time contains the member ZWESIP00
with default configuration values. You can copy this member to another data set, for example your system PARMLIB data set, or else leave it in SZWESAMP
.
If you choose to leave ZWESIPxx
in the installation PDS SZWESAMP
used at installation time, this has advantages for SMP/E maintenance because the APPLY and RESTORE jobs will be working directly against the runtime library.
Wherever you place the ZWESIP00
member, ensure that the data set is listed in the PARMLIB DD
statement of the started task ZWESISTC
.
#
PROCLIBFor the cross memory server to be started, you must move the JCL PROCLIB ZWESISTC
member from the installation PDS SAMPLIB SZWESAMP
into a PDS that is on the JES concatenation path.
You need to update the ZWESISTC
member in the JES concatenation path with the location of the load library that contains the load module ZWESI00
by editing the STEPLIB DD statement of ZWESISTC
. Edit the PARMLIB DD statement to point to the location of the PDS that contains the ZWESIP00
member.
For example, the sample JCL below shows ZWESVSTC
where the APF-authorized PDSE containing ZWESI00
is ZWESVUSR.SZWEAUTH
and the PDS PARMLIB containing ZWESIP00
is ZWESVUSR.SZWESAMP
.
//ZWESIS01 EXEC PGM=ZWESIS01,REGION=&RGN,// PARM='NAME=&NAME,MEM=&MEM'//STEPLIB DD DSNAME=ZWESVUSR.SZWEAUTH,DISP=SHR//PARMLIB DD DSNAME=ZWESVUSR.SZWESAMP,DISP=SHR//SYSPRINT DD SYSOUT=*
#
SAF configurationYou must configure the z/OS system in order to correctly run the cross memory server. The steps to perform this are included in the JCL member ZWESECUR
that is used to configure a z/OS environment for Zowe, and documented in the section Configure the cross memory server for SAF.
#
Summary of cross memory server installationYou can start the cross memory server using the command /S ZWESISTC
once the following steps have been completed.
- JCL member
ZWESVSTC
is copied fromSZWESAMP
installation PDS to a PDS on the JES concatenation path. - The PDSE Load Library
SZWEAUTH
is APF-authorized, or Load moduleZWESI00
is copied to an existing APF Auth LoadLib. - The JCL member
ZWESVSTC
DD statements are updated to point to the location ofZWESI00
andZWESIP00
. - The load module
ZWESI00
must run in key 4 and be non-swappable by adding a PPT entry to the SCHEDxx member of the system PARMLIBPPT PGMNAME(ZWESI00) KEY(4) NOSWAP
.
#
Starting and stopping the cross memory server on z/OSThe cross memory server is run as a started task from the JCL in the PROCLIB member ZWESISTC
. It supports reusable address spaces and can be started through SDSF with the operator start command with the REUSASID=YES keyword:
/S ZWESISTC,REUSASID=YES
The ZWESISTC task starts and stops the ZWESASTC task as needed. Do not start the ZWESASTC task manually.
To end the Zowe cross memory server process, issue the operator stop command through SDSF:
/P ZWESISTC
Note:
The starting and stopping of the ZWESVSTC
started task for the main Zowe servers is independent of the ZWESISTC
cross memory server, which is an angel process. If you are running more than one ZWESVSTC
instance on the same LPAR, then these will be sharing the same ZWESISTC
cross memory server. Stopping ZWESISTC
will affect the behavior of all Zowe servers on the same LPAR that use the same cross-memory server name, for example ZWESIS_STD. The Zowe Cross Memory Server is designed to be a long-lived address space. There is no requirement to recycle regularly. When the cross-memory server is started with a new version of its load module, it abandons its current load module instance in LPA and loads the updated version.
To diagnose problems that may occur with the Zowe ZWESVSTC
not being able to attach to the ZWESISTC
cross memory server, a log file zssServer-yyyy-mm-dd-hh-mm.log
is created in the instance directory /logs
folder each time a Zowe ZWESVSTC
instance is started. More details on diagnosing errors can be found in Zowe Application Framework issues.
#
Zowe auxiliary serviceUnder some situations in support of a Zowe extension, the cross memory server will start, control, and stop an auxiliary address space. This run as a ZWESASTC
started task that runs the load module ZWESAUX
.
#
When to configure the auxiliary serviceUnder normal Zowe operation, you will not see any auxiliary address spaces started. However, if you have installed a vendor product running on top of Zowe, this may use the auxiliary service so it should be configured to be launchable. A vendor product documentation will specify whether it needs the Zowe auxiliary service to be configured so ensure that it is needed before attempting the configuration steps.
If you are just using core Zowe functionality, you do not need to configure the auxiliary service. Even with the Zowe auxiliary service configured, there is no situation under which you should manually start the ZWESASTC
started task.
#
Installing the auxiliary serviceTo install the auxiliary service to allow it to run, you take similar steps to install and configure the cross memory server as described above, but with a different JCL PROBLIC member and a different load module. There is no PARMLIB for the auxiliary service.
- JCL member
ZWESASTC
is copied fromSZWESAMP
installation PDS to a PDS on the JES concatenation path. - The PDSE load library
SZWEAUTH
is APF-authorized, or load moduleZWESAUX
is copied to an existing APF Auth LoadLib. - The load module
ZWESAUX
must run in key 4 and be non-swappable by adding a PPT entry to the SCHEDxx member of the system PARMLIBPPT PGMNAME(ZWESAUX) KEY(4) NOSWAP
.
Important!
The cross memory ZWESISTC
task starts and stops the ZWESASTC
task as needed. Do not start the ZWESASTC
task manually.